0000187: How to access easyCwmp UI ?

(0000591)
hkachhia (reporter)
2016-12-02 09:54

Is there any tutorial for use for create demo using easycwmp ?

(0000592)
Anis (developer)
2016-12-02 10:19

there is easycwmp Commands (for data model handling)
easycwmp -h for help

(0000593)
hkachhia (reporter)
2016-12-02 10:42

easycwmp -h for help getting below response

USAGE: /usr/sbin/easycwmp command [parameter] [values]
command:
  get [value|notification|name]
  set [value|notification]
  apply [value|notification|object|service]
  add [object]
  delete [object]
  download
  factory_reset
  reboot
  inform [parameter|device_id]
  --json-input
invalid action '-h'

how can i use it ?

(0000594)
Anis (developer)
2016-12-02 11:46
edited on: 2016-12-02 11:52

for example easycwmp get value ==> show you all the data model tree

(0000595)
hkachhia (reporter)
2016-12-02 12:19

In get value I have found below value. What is the use below URL ?

{ "parameter": "Device.ManagementServer.URL", "value": "http:\/\/192.168.1.110:8080\/openacs\/acs" }

Is there any GUI for easycwmp ? or tutorial for beginner then provide me

(0000596)
Anis (developer)
2016-12-02 13:31

yes easycwmp have a GUI : type the @ip address of your device on your browser and then you get the authentication page.

(0000597)
hkachhia (reporter)
2016-12-02 13:55

Which device ?

(0000598)
Anis (developer)
2016-12-02 13:56

where you installed the easycwmp

(0000599)
hkachhia (reporter)
2016-12-05 06:33

I have tried to access using the IP address but It does not open. Is it run on specific port ?

I have tried to access below IP as well as my machine IP.
{ "parameter": "Device.ManagementServer.URL", "value": "http:\/\/192.168.1.110:8080\/openacs\/acs" }

In my machine I have already installed Apache webserver, so is it conflict with it ?

(0000600)
Anis (developer)
2016-12-05 18:12

if you want to configure the parameters related to the easycwmp:
edit the file /etc/config/easycwmp.

the http://192.168.1.110:8080/openacs/acs [^] is the ACS URL and you can change it.

(0000601)
hkachhia (reporter)
2016-12-09 09:30

Getting below error:

* Hostname was NOT found in DNS cache
* Trying 192.168.1.110...
* Connection timed out after 30001 milliseconds
* Closing connection 2
2016-12-09 08:27:31 [easycwmp] NOTICE - LibCurl Error: Connection timed out after 30001 milliseconds
2016-12-09 08:27:31 [easycwmp] NOTICE - sending http message failed
rpc_inform(218): sending Inform http message failed
2016-12-09 08:27:31 [easycwmp] NOTICE - sending Inform failed
2016-12-09 08:27:31 [easycwmp] NOTICE - external: execute apply service
2016-12-09 08:27:31 [easycwmp] NOTICE - external script exit
2016-12-09 08:27:31 [easycwmp] NOTICE - end session failed
2016-12-09 08:27:31 [easycwmp] NOTICE - retry session in 30 sec, RetryCount = 3

my machine IP address is : 10.0.2.15 why it's trying to connect 192.168.1.110 ?

(0000602)
Anis (developer)
2016-12-09 10:14

192.168.1.110 is ACS URL you have to change it by the ip address of your ACS URL.
To do that you have to edit the file /etc/config/easycwmp.

what is your address URL ?
and which ACS do you use ?

Issue History
Date Modified	Username	Field	Change
2016-12-02 09:50	hkachhia	New Issue
2016-12-02 09:54	hkachhia	Note Added: 0000591
2016-12-02 10:19	Anis	Note Added: 0000592
2016-12-02 10:42	hkachhia	Note Added: 0000593
2016-12-02 11:46	Anis	Note Added: 0000594
2016-12-02 11:52	Anis	Note Edited: 0000594	View Revisions
2016-12-02 12:19	hkachhia	Note Added: 0000595
2016-12-02 13:31	Anis	Note Added: 0000596
2016-12-02 13:55	hkachhia	Note Added: 0000597
2016-12-02 13:56	Anis	Note Added: 0000598
2016-12-05 06:33	hkachhia	Note Added: 0000599
2016-12-05 18:12	Anis	Note Added: 0000600
2016-12-09 09:30	hkachhia	Note Added: 0000601
2016-12-09 10:14	Anis	Note Added: 0000602
2017-01-27 16:00	mohamed.kallel	Status	new => resolved
2017-01-27 16:00	mohamed.kallel	Resolution	open => fixed
2017-01-27 16:00	mohamed.kallel	Assigned To	=> mohamed.kallel

Notes
(0000591) hkachhia (reporter) 2016-12-02 09:54	Is there any tutorial for use for create demo using easycwmp ?

(0000592) Anis (developer) 2016-12-02 10:19	there is easycwmp Commands (for data model handling) easycwmp -h for help

(0000593) hkachhia (reporter) 2016-12-02 10:42	easycwmp -h for help getting below response USAGE: /usr/sbin/easycwmp command [parameter] [values] command: get [value\|notification\|name] set [value\|notification] apply [value\|notification\|object\|service] add [object] delete [object] download factory_reset reboot inform [parameter\|device_id] --json-input invalid action '-h' how can i use it ?

(0000594) Anis (developer) 2016-12-02 11:46 edited on: 2016-12-02 11:52	for example easycwmp get value ==> show you all the data model tree

(0000595) hkachhia (reporter) 2016-12-02 12:19	In get value I have found below value. What is the use below URL ? { "parameter": "Device.ManagementServer.URL", "value": "http:\/\/192.168.1.110:8080\/openacs\/acs" } Is there any GUI for easycwmp ? or tutorial for beginner then provide me

(0000596) Anis (developer) 2016-12-02 13:31	yes easycwmp have a GUI : type the @ip address of your device on your browser and then you get the authentication page.

(0000597) hkachhia (reporter) 2016-12-02 13:55	Which device ?

(0000598) Anis (developer) 2016-12-02 13:56	where you installed the easycwmp

(0000599) hkachhia (reporter) 2016-12-05 06:33	I have tried to access using the IP address but It does not open. Is it run on specific port ? I have tried to access below IP as well as my machine IP. { "parameter": "Device.ManagementServer.URL", "value": "http:\/\/192.168.1.110:8080\/openacs\/acs" } In my machine I have already installed Apache webserver, so is it conflict with it ?

(0000600) Anis (developer) 2016-12-05 18:12	if you want to configure the parameters related to the easycwmp: edit the file /etc/config/easycwmp. the http://192.168.1.110:8080/openacs/acs [^] is the ACS URL and you can change it.

(0000601) hkachhia (reporter) 2016-12-09 09:30	Getting below error: * Hostname was NOT found in DNS cache * Trying 192.168.1.110... * Connection timed out after 30001 milliseconds * Closing connection 2 2016-12-09 08:27:31 [easycwmp] NOTICE - LibCurl Error: Connection timed out after 30001 milliseconds 2016-12-09 08:27:31 [easycwmp] NOTICE - sending http message failed rpc_inform(218): sending Inform http message failed 2016-12-09 08:27:31 [easycwmp] NOTICE - sending Inform failed 2016-12-09 08:27:31 [easycwmp] NOTICE - external: execute apply service 2016-12-09 08:27:31 [easycwmp] NOTICE - external script exit 2016-12-09 08:27:31 [easycwmp] NOTICE - end session failed 2016-12-09 08:27:31 [easycwmp] NOTICE - retry session in 30 sec, RetryCount = 3 my machine IP address is : 10.0.2.15 why it's trying to connect 192.168.1.110 ?

(0000602) Anis (developer) 2016-12-09 10:14	192.168.1.110 is ACS URL you have to change it by the ip address of your ACS URL. To do that you have to edit the file /etc/config/easycwmp. what is your address URL ? and which ACS do you use ?

Relationships