View Issue Details

IDProjectCategoryView StatusLast Update
0000317easycwmpHelppublic2018-04-04 18:31
Reportershasta Assigned To 
Status newResolutionopen 
Summary0000317: easycwmp doesn't send (passive / active) notification
DescriptionUpgrade easycwmp from 1.1.2 to 1.6.1, found that notify is no arg now.
#ubus list -v
'tr069' @bd50a229

So I tested notification function as below:
#sh /usr/sbin/easycwmp set notification Device.IP.Diagnostics.IPPing.Host 2
#sh /usr/sbin/easycwmp apply notification

In easycwmp config file I see:

config notifications
        list active 'Device.IP.Diagnostics.IPPing.Host'

then I tried to modify Device.IP.Diagnostics.IPPing.Host:

#sh /usr/sbin/easycwmp set value Device.IP.Diagnostics.IPPing.Host
#sh /usr/sbin/easycwmp apply value

and got response message:
{ "status": "1" }

then I call ubus to send notify:
#ubus call tr069 notify

Response (please ignore date):
2012-01-01 01:49:30 [easycwmp] NOTICE - triggered ubus notification
2012-01-01 01:49:31 [easycwmp] NOTICE - checking if there is notify value change
2012-01-01 01:49:31 [easycwmp] NOTICE - external script init
2012-01-01 01:49:31 [easycwmp] NOTICE - external: execute check_value_change
2012-01-01 01:49:32 [easycwmp] NOTICE - external script exit

and nothing happened, no Inform, no VALUE CAHNGE event.
Do I missed something or issue wrong command for notification?
TagsNo tags attached.
e-mail notification



2018-03-26 13:10

administrator   ~0000855

Do not set the host with easycwmp command. This will not trigger notification.
And also do test notification a parameter which defined in easycwmp config. You have to user another config file like wireless.


2018-04-04 18:31

reporter   ~0000856

Hi shasta.

/usr/sbin/easycwmp is used to act as the ACS, so the changes made with "set value" will not trigger a notification to the ACS (since it will be redundant for the ACS to receive the value it "sent" in the first place).

In order to trigger a "4 VALUE CHANGE" event you need to set the notification to "2" as you did and apply the changes with "/usr/sbin/easycwmp apply".

Then, change the parameter value "manually". For example, try with the parameter "Device.WiFi.SSID.1.SSID" which is defined in /etc/config/wireless, as mohamed.kallel said.

Then call "ubus call tr069 notify" and it will identify the change and trigger a "4 VALUE CHANGE" event.

Issue History

Date Modified Username Field Change
2018-03-19 08:30 shasta New Issue
2018-03-26 13:10 mohamed.kallel Note Added: 0000855
2018-04-04 18:31 nromero Note Added: 0000856