EasyCwmp - easycwmp
View Issue Details
0000156easycwmp[All Projects] Helppublic2016-07-29 10:452016-08-16 13:00
resolvedno change required 
0000156: How to enable Digest auth on the easycwmp
  I have a question that how to configure our eascwmp to enable Digest Auth. In other words,whether we have a swith to enable or disable it by CPE
  My configure is as following:

root@andy:/home/andy# cat /etc/config/easycwmp

config local
        option interface 'eth0'
        option port '5474'
        option ubus_socket '/var/run/ubus.sock'
        option date_format '%FT%T%z'
        option username 'vigor'
        option password 'password'
        option logging_level '3'

config acs
        option url '' [^]
        option username 'acs'
        option password 'password'
        option periodic_enable '1'
        option periodic_time '0001-01-01T00:00:00Z'
        option periodic_interval '1800'
        option parameter_key 'unsetCommandKey'

config device
        option manufacturer 'easycwmp'
        option oui 'FFFFFF'
        option product_class 'easycwmp'
        option serial_number 'FFFFFF123456'
        option hardware_version 'example_hw_version'
        option software_version 'example_sw_version'
No tags attached.
Issue History
2016-07-29 10:45andy_yangNew Issue
2016-07-29 10:47andy_yangNote Added: 0000517
2016-07-29 16:43mohamed.kallelNote Added: 0000518
2016-08-04 03:55andy_yangNote Added: 0000523
2016-08-16 13:00mohamed.kallelStatusnew => resolved
2016-08-16 13:00mohamed.kallelResolutionopen => no change required
2016-08-16 13:00mohamed.kallelAssigned To => mohamed.kallel

2016-07-29 10:47   
for exampel the command:
  uci set easycwmp.@local[0].digest_enable='1'
2016-07-29 16:43   
1) If you mean digest authentication requested by the ACS, then you have only to set the user name and the password and then the CPE will send them upon the ACS request of digest authentication

2) If you mean digest authentication requested by the CPE upon a connection request, then you can enable the digest authentication by setting username and password and disable the authentication request by removing the options @local[0].username and @local[0].password
2016-08-04 03:55